Renew
//
PEMF + Red Light Therapy
Renew+ PEMF Mat
Five therapies. One mat. PEMF, red light, far infrared, heat, and negative ions in a single session.
- 5 therapies in one mat — PEMF, 660nm red light, far infrared, heat, negative ions
- 8 independent PEMF coils with full 1–30 Hz frequency control + 4 research-informed presets
- 144 red LEDs at 660nm — independently controlled, run up to 9 hours overnight
- Crystal-heated far infrared (amethyst, jade, tourmaline, clay) + 3,500+ negative ions
- Precision temperature control 86–158°F · EMF filtration · PEMF visualizer included
| Therapies | PEMF · Red Light (660nm) · Far Infrared · Thermal · Negative Ions |
| PEMF Coils | 8 independent coils (full-body distribution) |
| Frequency Range | 1–30 Hz · Presets: 3 / 8 / 10 / 23 Hz |
| Photon LEDs | 144 red LEDs at 660nm · Up to 9 hr timer |
| Crystals | Amethyst · Jade · Tourmaline · Clay (Bian stone) |
| Temperature Range | 86–158°F (30–70°C) |
| Dimensions | 72.8" × 27.5" × 1" · 280W · 110–120V |
| Includes | Mat · Controller · Carrying case · PEMF visualizer · Fitted sheet |
Renew+ PEMF Mat · Controller · Carrying case · PEMF visualizer · Fitted sheet · User manual
- Free standard U.S. shipping on orders $150+
- Ships within 1–2 business days
- 30-day returns on unopened products
- Questions? Contact us at info@reconwellness.com
// Why Renew+
Built Different.
Feels Different.
// 01
Five Therapies. One Mat. One Session.
Most brands sell you one modality and call it a recovery system. The Renew+ PEMF Mat puts five in one surface — PEMF pulses through deep tissue while 660nm red light works the surface. Far infrared heats from the inside out while negative ions and thermal therapy round out the environment. One 30-minute session delivers what would normally take three or four separate treatments stacked back-to-back.
Five therapies. One session. One mat. →
5 Therapies
// 02
8 PEMF Coils. Full-Body Coverage. Research-Grade Frequencies.
Most PEMF mats give you 2–4 coils and a couple of fixed presets. The Renew+ runs 8 independent PEMF coils distributed across the full length of the mat — shoulders to calves. 4 research-informed presets (3, 8, 10, 23 Hz) plus full 1–30 Hz control in 1 Hz increments. Up to 3 Gauss. Research-grade frequency control in a consumer product.
4 presets to start. 1 Hz increments to dial in. →
8 coils
// 03
144 Red Light LEDs. Two Recoveries at Once.
Most PEMF mats forgot the light. Most light mats forgot the PEMF. The Renew+ runs both. 144 red LEDs at 660nm built into the crystal and coil matrix — the most studied wavelength in photobiomodulation research. Independently controlled. Run PEMF + Red Light together. Or red light only for up to 9 hours overnight. Or PEMF only. Your call.
PEMF pulses deep. Red light treats the surface. →
144 LEDs
// 04
Four Natural Crystals. Far Infrared. Not a Gimmick.
Amethyst, jade, tourmaline, and clay heated to 86–158°F emit far infrared radiation in the 4–14 micron range — penetrating deeper than surface heat alone. Tourmaline naturally generates 3,500+ negative ions. Jade distributes heat evenly. Clay retains and releases gradually. Real minerals doing real work. Science, not vibes.
Four crystals. Real far infrared. Precision heat. →
158°F
// How to Use
Five Steps.
Zero Confusion.
01
Set Up the MatRoll the mat out on your bed, couch, or floor. Plug in the controller.
02
Pick Your PEMF FrequencyUse a preset — 3 Hz for sleep, 10 Hz for recovery, 23 Hz for energy. Or dial in 1–30 Hz manually.
03
Set the HeatSet temperature 86–158°F and timer up to 12 hours for far infrared and heat.
04
Activate Red LightRun red light independently for up to 9 hours, or stack with PEMF and heat for the full 5-therapy session.
05
Lay Down and Recover30 minutes per PEMF session for active recovery. Run overnight for sleep support.
// Recovery Isn't Rest. Recovery Is Preparation.
Recover Anywhere, Thrive Everywhere