Commercial PEMF Systems Built for Operators
Compression is the foundation of a recovery floor. PEMF is the next layer. It adds a quiet, low-effort session members can book on any day, hard training or not.
Quick Answer
RECON Wellness’s commercial PEMF system, Pillar 02 of the Integrated Recovery System, is built for facilities offering relaxation and recovery-routine sessions. The Renew PEMF Mat and Renew+ Photon Mat deploy commercially via the Renew commercial setup with sanitization cover for shared-use environments. Four presets run as named settings: 3 Hz Wind-Down, 8 Hz Unwind, 10 Hz Everyday, and 23 Hz Pre-Training. Request a facility quote.
Compression Leads. PEMF Deepens the Tier.
Recovery isn't a single-modality category anymore. Compression leads the floor. Layering PEMF adds relaxation, wind-down, and pre-training sessions: the depth that supports a premium tier and the variety that keeps members coming back.
How Operators Configure PEMF in Live Facilities
Two configuration patterns running in performance recovery and clinical settings today. The standard Renew Mat as the operator-grade primary deployment. The Renew+ Photon Mat as the consolidated two-pillar option for specific use cases. Direct operator quotes and full case studies in the next content release.
The standard Renew Mat is the primary commercial PEMF push. Operators deploy 2 to 3 Renew Mats on dedicated recovery beds within a multi-modality recovery bar. Members rotate between compression stations, PEMF mats, and overhead red light, sequenced as a full three-pillar protocol session. Why standard over Photon for most commercial deployments: PEMF mats get covered with a sheet during member sessions, so the integrated red light on the Photon Mat is rarely delivering its full value in a typical recovery-bar configuration. Operators save the price difference on the standard Renew and invest it into a dedicated overhead red light panel that actually reaches the member, which is the better unit economics on the same protocol stack.
The Renew+ Photon Mat consolidates PEMF + 660nm red light on a single mat surface. Operators choose this configuration when floor space is at a premium, when a member is doing a face-up or skin-exposed session where the integrated red light actually reaches them (clinical, aesthetic, or face-down with arms-up positioning), or when session time is the constraint and the operator wants two-pillar delivery without sequencing two separate stations. Still available across the commercial PEMF lineup, but standard Renew Mat is the operator-grade recommendation for most recovery-bar configurations.
Commercial PEMF Preset Map
Four presets, one dial. Three views: the Frequency Map (interactive slider), Session Basics cards, and the operator Protocol Matrix.
Commercial Recovery Amenity-Tier ROI Calculator
The right operator question for PEMF isn't "how many sessions can I bill per day?", it's "how much can I charge my members for premium-tier access to a fully equipped recovery suite?" Model your member base, premium tier upcharge, and equipment investment below.
Daily PEMF Session Capacity Calculator
PEMF sessions run longer than compression sessions. Model your facility hours, session length, and mat count to see daily and monthly capacity ceilings.
Commercial PEMF for Gyms, PT Clinics, Wellness Studios, and Sports Teams
Three product configurations cover the operator-grade PEMF spectrum, from single-area recovery-chair use to full-body multi-mat recovery bars to dual-modality red light + PEMF stations.
See the standard Renew Mat, primary commercial PEMF push → · Renew+ Photon Mat (two-pillar alternative) →
Why Operators Stack All Three Pillars
PEMF is one of three modalities in RECON's recovery system. Operators who stack all three, mechanical compression, PEMF, and photobiomodulation, offer more complete sessions and a deeper recovery menu.
Sequential Air Compression
Sequential air compression at 200 to 260 mmHg, chamber by chamber up the leg. Members feel the pressure build, hold, and release. Recovery Cycle for everyday sessions, High-Pressure Mode for members who want more.
PEMF + Four Named Presets
Pulsed electromagnetic fields delivered through coils in the mat. Four presets run as named settings: 3 Hz Wind-Down, 8 Hz Unwind, 10 Hz Everyday, 23 Hz Pre-Training. FIR heat adds warmth.
Red + Near Infrared Light
Red and near-infrared light from a dedicated overhead panel. Restore panels run 8 wavelengths. Blackline runs 9, from 480 to 1060nm.
The Sequencing Rule: Compression → PEMF → Red Light After Training
Compression first for sequential pressure on the legs. PEMF second on the 8 Hz Unwind preset. Red light last to finish the session before members head out. Before training: red light, PEMF on the 10 Hz Everyday preset, then optional light compression before the normal warm-up. Standard recommendation: separate stations for each pillar: dedicated compression stations, dedicated overhead red light panels, and dedicated Renew Mats for PEMF (sheet-covered, no integrated red light needed). The Renew+ Photon Mat is available for facilities consolidating PEMF + red light on a single surface when floor space or session-time constraints make the two-pillar mat the right call.
The Operator Economics of a Full Recovery Amenity Tier
The right way to model RECON's commercial value isn't per-session billing, it's a premium amenity tier on your existing member base. Operators add PEMF after compression because compression alone makes the amenity tier work; PEMF makes it defensible. The depth of layered protocols, compression, then PEMF, then red light, is what turns "we have recovery" into "we have a full recovery setup." That second line is the one members repeat to their friends.
Stack math: Members on the tier x your monthly tier price = monthly amenity revenue. Divide your build quote by that number for months to payback. Payback depends on your price and sessions per week. Run your numbers in the calculator above. Standard Renew Mat is the recommended PEMF in this stack: operators put the difference vs the Photon variant into a dedicated Restore overhead panel (which actually delivers red light to sheet-uncovered tissue, the way the protocol stack is designed to work).
See the Activate / Circulate lineup → · See the Restore Red Light lineup →
RECON Renew+: The Published Spec
Our numbers, the way operators need them. Ask any vendor for the same specs before you buy.
| RECON Renew+ | |
|---|---|
| Frequency Precision | 1 Hz |
| Frequency Range | 1 to 30 Hz |
| Coil Count | 8 coils |
| Integrated Red Light | 144× 660nm |
| FIR Heat | Yes (to 70°C) |
| Form Factor | Full-body mat |
| Warranty | Commercial |
| Support Location | US: direct line |
RECON Renew+: 1 Hz frequency control from 1 to 30 Hz, 144 integrated 660nm LEDs, commercial duty-cycle build.
The 30-Day Activation Guarantee
30-Day Activation Guarantee
If your facility doesn't book 30 paid PEMF sessions in the first 30 days per system, we refund your deposit in full. One condition: you run the launch protocol we hand you on day one.
Before you buy: a free on-site Recovery Demo Day, so your team runs real sessions first. Delivery and setup are free in the Denver metro. On any return, the buyer pays freight at cost, both ways.
Every commercial order also includes the RECON Operator Onboarding Kit, staff training on the four preset protocols, member screening protocols, session launch templates, and direct ops support. The protocol library is the differentiator, same mat, four distinct member services.
Commercial PEMF: Operator Questions Answered
Ten questions operators ask before ordering. Plain-English answers backed by RECON's published specs.
Yes. Operators in performance gyms, recovery studios, and PT clinics run 20 to 30 minute mat sessions as drop-ins, packages, or recovery memberships. A single Renew PEMF Mat anchors a station. Multi-mat configurations support parallel sessions across recovery bars and recovery rooms.
Four presets, each a named setting: 3 Hz Wind-Down, 8 Hz Unwind, 10 Hz Everyday, and 23 Hz Pre-Training. The dial runs 1 to 30 Hz in 1 Hz steps, and FIR heat runs up to 70°C. Staff set three things per session: frequency, heat, and time.
As a recovery routine. Members book a session, staff pick the preset, and the member relaxes on the mat. RECON Renew makes no medical claims. Clinical decisions stay with the clinician.
Payback depends on your price and sessions per week. Run your numbers above.
No. RECON Renew is a general wellness product, not a medical device. It is built for relaxation and recovery routines and makes no medical claims.
RECON Renew is built as an operator-grade mat: 1 Hz frequency precision, a 1 to 30 Hz range with four named presets, and a commercial duty-cycle build for facility runtime. Renew+ adds an integrated 660nm red light array, two pillars on a single hardware footprint.
Start with the four presets:
- 10 Hz Everyday before training and as the default for new members
- 8 Hz Unwind after training
- 3 Hz Wind-Down for evening sessions at 35 to 40°C heat
- 23 Hz Pre-Training saved for peak days
Custom 1 Hz steps from 1 to 30 Hz let staff fine-tune how a session feels. RECON publishes these settings as conservative starting points.
A PEMF mat running 25-minute sessions in a 10-hour facility day supports approximately 20 session slots per mat per day. PEMF sessions are slightly longer than compression sessions; run the full protocol window. Use the session capacity calculator above to model your specific facility hours and session length.
PT clinics typically deploy 2 to 3 standard Renew Mats on individual recovery beds or as standalone recovery stations. The standard Renew Mat is the primary commercial PEMF recommendation, same 1 Hz frequency precision and full 1 to 30 Hz range as the Renew+, and since PEMF mats are covered with a sheet during member sessions, the integrated red light on the Photon variant is rarely used in standard clinic setups.
The Renew+ Photon Mat remains available for facilities where the red light actually reaches the member, aesthetic protocols, face-up positioning, or space-constrained rooms consolidating two pillars on a single surface.
The Renew+ Pillow handles single-area targeted PEMF + red light at the neck, cervical spine, lumbar, or joint-specific level, a good fit for PT and clinic recovery rooms where red light around the neck and head actually reaches the member.
Yes. Combining all three is the foundation of the RECON three-pillar recovery system. After training, the recommended sequence is Compression → PEMF → Red Light: compression first, then the 8 Hz Unwind preset, then red light to finish. Before training: Red Light → PEMF → optional light compression, with the 10 Hz Everyday preset, before the normal warm-up. The Renew+ Photon Mat consolidates the last two steps on a single surface: compression first, then red light + PEMF in one session on the mat.
Where PEMF Deploys
Built for Every Facility Where Members Want to Unwind
RECON commercial PEMF (Pillar 02 of the Integrated Recovery System) deploys across facility-style verticals where members book relaxation and recovery-routine sessions. Renew commercial setup includes a sanitization cover for shared deployment.
Members Don't Shop Gyms for What They Already Have. They Shop for What They Don't.
The recovery amenity category is moving fast. Start with the standard Renew Mat, the primary commercial recommendation for most recovery-bar configurations. The Renew+ Photon Mat is available when you want PEMF + red light on a single surface; the Renew+ Pillow is the targeted neck/spine option for clinical/PT contexts. Every order includes the RECON Operator Onboarding Kit.